Crypto Exchange Binance Blacklisted by Russia’s Telecom ...

Ethereum Classic

Ethereum Classic is an open, decentralized, and permissionless public blockchain, that aims to fulfill the original promise of Ethereum, as a platform where smart contracts are free from third-party interference. ETC prioritizes trust-minimization, network security, and integrity. All network upgrades are non-contentious with the aim to fix critical issues or to add value with newly proposed features; never to create new tokens, or to bail out flawed smart contracts and their interest groups.
[link]

Trading with iceberg orders mode on the Binance Exchange via Moonbot

Trading with iceberg orders mode on the Binance Exchange via Moonbot
Binance Exchange allows API users to trade with iceberg orders. It is important to note that iceberg orders are not available from the website or the official application of the exchange.
Binance Exchange allows API users to trade with iceberg orders.
An iceberg or ice mountain is a large piece of freshwater ice that has broken off a glacier or an ice shelf and is floating freely in open water. About 90% of an iceberg is below the surface of the water.
Iceberg orders can be absolutely hidden in the order book, where only 1/10 of the order is visible and the remaining 9/10 is hidden.

How an iceberg order works
For example, you place an order to sell / buy 1000 coins. Of these, 100 coins (1/10 part) will be visible in the orderbook to other traders, 900 coins will not be visible in the orderbook.
In this case, the order exists on the exchange in full with all 1000 coins, and until it is filled out completely, the price will not go over it.
There are both positive and negative aspects in this.
  • Positive:
Thanks to the developer, all Moonbot users reserve the same advantage over the other players on the market. It is the ability to hide any amount in the trading book (showing only 1/10 of it), in order not to create walls when buying or selling, thereby confusing other market participants.
MoonBot
Example: a sell order with the equivalent of 1.7 BTC in a half-empty order book looked like 0.17 BTC.
Market participants bought from an invisible seller until his coins ran out. Thus, a large wall with an order was not shown, which could lead to a price drop.

Negative:
  • The impossibility of high-quality scalping on coins with a price step of more than 0.08–0.1% (usually with a price under 1,300 satoshi). Due to the accumulation of a large number of participants at the same price on such coins, the question of the queue of buying / selling becomes particularly relevant. So with the iceberg mode “On”, only 10% of the order is filled, while for the other participants with the iceberg mode “Off”, the full order is filled. This happens in a such way because the exchange places 10% of the order in the order book initially, and the next 10% is set only when the previous ones are filled. Then the rest are not set up within the same queue, and go to the end after the last orderbook buyer / seller. Therefore, the greater the price step (the smaller the value of the coin) — the more buyers / sellers at the same price, and accordingly the greater the turn and the final execution of the order in iceberg mode.
Video review, which proves that even if one bot with an iceberg mode “On” opens order first, second bot with an iceberg mode “Off” off makes the deal faster.

https://preview.redd.it/whu1w4209fa31.png?width=1200&format=png&auto=webp&s=2acae47f08eee2f232652d07945c03cca2cb2ce2
While one bot with the iceberg mode “On” is waiting for a buy order to be filled (each time when buy price is touched, only 10% is filled), a bot with the iceberg mode “Off” fills its orders at 100%.
Example: Imagine a situation (picture below) where you want to buy a coin at the price of 1120 sats and put up at this price your limit order of 1 BTC with iceberg mode “On”. After you have placed your order, another buyer (let’s call him buyer “X”) put his order at the same price in the queue (with iceberg mode “Off”).
The order book will show the volume of 1.1 BTC for purchase at a price of 1,120 sats. After the sale of 0.2 BTC at the price of 1120, your order will be filled for 0.1 BTC, and the next 0.1 BTC will be queued after 0.9 BTC (0.1 BTC will also be partially fulfilled) of the buyer “X”.
Until the next execution of your order will have to stand in line at 0.9 BTC.
If a third buyer appears at this time (buyer “Y”) with a volume of 0.3 BTC at the price of 1120 sats, then after another 1.2 BTC is sold at a price of 1120 satoshi (0.9 BTC — order of the buyer “X” will be filled completely, 0.1 BTC — your part of the iceberg order will be filled, 0.2 BTC — part of the order of the buyer “Y” will be filled ), the next 0.1 BTC of your order will queue for the remainder of the order (0.1 BTC) of the buyer “Y”.
And only if no one else places an order to buy at the price of 1,120 sats , your remaining 0.8 BTC volume will be completed without a queue.
https://preview.redd.it/yrk5j9azbfa31.png?width=1101&format=png&auto=webp&s=8efc4eed5457d98ba8e246301c94f16965ff9440
When iceberg mode On, your purchase order will be executed immediately in two cases only — there is no queue at your price after you or the sale at your price will be more than total volume of buy orders at this price.
  • The impossibility of the normal operation of the strategy of Moonshot for the reason above.
Partial fill of a buy order with the Moonshot strategy
  • The impossibility of normal evaluation of the order book (the search for large buy / sell orders where the price usually seeks) due to the presence of invisible walls in it — often it is not enough sats to reach the necessary price where walls are based.
Our Links
Websites
  • moon-bot.com — the official site of the MoonBot.
  • forum.moon-bot.com — MoonBot forum.
  • stat.moon-bot.com — trade statistics of the community members, TOP-50.
Topics on the BitcoinTalk Forum
  • bitcointalk.org/index.php?topic=2234450.0
  • bitcointalk.org/index.php?topic=2234198.0
Telegram Groups
  • t.me/moon_bot_crypto — the main RU-chat for communication.
  • t.me/Moon_Bot_Public — main ENG chat for communication and support.
  • t.me/MoonBotSettings — RU technical support chat.
  • t.me/moon_bot_kurilka — general RU chat.
Telegram Channel
t.me/MoonBotNews — the latest news and updates.
Social Network
www.facebook.com/MoonBotTerminal
Reproduction without attribution is prohibited.
submitted by MoonTrader_io to Moontrader_official [link] [comments]

Atomic Swap with USDT: Swap Online solution in two hundred lines of code

Atomic Swap with USDT: Swap Online solution in two hundred lines of code
https://preview.redd.it/3mx7amtio9g11.png?width=696&format=png&auto=webp&s=f2bd956843196fa2f51048a86f9608b6e714f62e
On the eve of the release on the mainnet, the team of the cross-chain wallet Swap Online is publishing a research study and the code of the atomic swapusing USDT.

USD Tether — the equivalent of the dollar on Omni Layer

The solution described above with the protocol “over” the Bitcoin network gave life to one of the most controversial cryptocurrency projects of the last two years — Tether. Tether (symbol Tether — ₮, ticker — USDT) is a hybrid cryptocurrency with a rate binding to one US dollar. Moreover, according to the assurances of Tether Limited, the issuer of the given tokens, the “binding” is to be understood literally, as each purchased token of USDT corresponds to one US dollar available at the disposal of the company.
If we take the three largest exchanges based on their daily turnover of transactions at the time of writing (Binance, OKEx and HuObi), and then track the five most popular trading pairs for each, we will encounter USDT in 13 out of 15 cases.

USDT — the token with the largest capitalization in the world.

All this generates great community interest in faster, safer and cheaper solutions for exchanging Tether into other currencies. Obviously, such a solution could be atomic swaps, which are instant, decentralized cross-chain exchanges. The Komodo laboratory, the main headliners of this technology, who presented it in the autumn of 2017, reported on the successful exchange of KMD to USDT carried out on the BarterDEX platform, Komodo’s own exchanger.
https://preview.redd.it/z7tx3cv0p9g11.png?width=597&format=png&auto=webp&s=f0944434f691d69ae45c5b80e00fed2736423f7a
At the same time, according to our data, the developers of Komodo made a swap on the ERC20-a version of Tether, which is only available in 3% of cases. Approximately 60 million USDT from global turnover can thus be exchanged using this method, which, obviously, cannot be considered as a solution to the problem. Striking examples of imperfections of existing solutions can be found even on Etherscan.
https://preview.redd.it/39nc2ji6p9g11.png?width=800&format=png&auto=webp&s=992a4adc022175d90d111f030047ba8adeda14f8
This fall, the team of Swap Online is ready to present an atomic swap with Tether. And here’s how we did it.

How Omni conducts transactions

To carry out the Omni transaction, a user needs to create a regular Bitcoin transaction-transfer of 546 satoshi (minimum) with an additional output storing payload using the OP_RETURN op-code. An example of such a transaction. The payload is a mandatory part of any Omni transaction, as it is a sequence of bytes containing all the necessary information about the transaction.

Let us consider what information is stored in the payload itself

transaction marker — 4 bytes, the mandatory part of any Omni payload is always equal to 0x6f6d6e69 — ASCII code omni. If the first 4 bytes of the sequence are not equal to 0x6f6d6e69, then this sequence is not a payload of Omni.
version — 2 bytes, an analog version of the transaction in Bitcoin. For the described algorithm to work, version 0 is used, or that is the same as 0x0000.
transaction type — 2 bytes, transaction type, for an atomic swap it is sufficient to use only “Simple send” transactions, as simple send is the usual sending of omni currency from its address to the address of the recipient. Simple send corresponds to the transaction type code 0, that is, the next 2 bytes 0x0000. Other possible types of transactions exist in Omni.
token identifier — 4 bytes, identifier of the currency used. For example TetherUS has the identifier 31 or 0x0000001f. All tokens created by the Omni protocol at this time can be seen via the following link.
amount — 8 bytes, for a transaction of type Simple send, this is the amount of the sent currency.
As you can see, payload does not store the addresses of senders and recipients of the transactions, these addresses are determined by the Bitcoin transaction in which the payload output was detected. By scanning inputs, the Omni protocol determines who makes the transfer by finding the output of the corresponding address from among the inputs of the transaction p2pkh.
Thus, for a transfer from Alice to Bob of, for example, 50,000,000 TetherUS, we need to create a Bitcoin transaction where one of the inputs will refer to the p2pkh output corresponding to the Alice address. It is also important that this entry be the first in this transaction (the index of this entry in the received transaction would be is minimal or none at all). One of the outputs of this transaction should be the output of p2pkh to Bob’s address, and another output must have been one of the outputs with the following payload:
https://preview.redd.it/0kmuzds8p9g11.png?width=575&format=png&auto=webp&s=af2f496596684af18091fb044f4e20b7e546c32f
Example 1
Example 2

Atomic Swap on Omni Layer

Suppose that Alice and Bob are willing to make an inter-blockchain exchange of cryptocurrencies. Alice wants to exchange the units of any Omni currency, for example TetherUS (the given currency has the currency identifier # 31 in the Mainnet, then in the text we will only talk about this currency of the Omni protocol, since it is the most popular at the moment, but the algorithm below will work for any currency of the Omni protocol as well) for b units of a cryptocurrency working on another blockchain. (Omni works on top of the Bitcoin blockchain, of course, according to the algorithm below it is possible to exchange TetherUS for Bitcoins, but due to their work on one and the same blockchain, this exchange can be done in a different, more efficient way).

Glossary

A — blockchain of Bitcoin.
B — the blockchain of the cryptocurrency for which TetherUS is being exchanged.
a — the sum of TetherUS, which Alice wants to exchange.
b — the sum of the cryptocurrency of the adjoining blockchain B, to which Alice wants to exchange her a TetherUS.

Creating a Transaction

1) Bob generates a random value secret.
2) Bob calculates the secretHash by performing the following operation: secretHash = RIPEMD160 (secret)
3) Bob creates and sends an htlc transaction sealed by secretHash
4) Bob sends Alice a secretHash value, and a hash of the hrlc transaction he created in the previous paragraph in order for Alice to make sure that the correct htlc transaction is actually present in the B blockchain.
5) Alice received from Bob the secretHash and hash of the htlc-transaction Bob created, and is convinced that such a transaction is really present in the B blockchain, and that this is indeed a htlc-transaction sealed by the secretHash value.
6) using the received secretHash, Alice creates the following transaction and translates it into the Bitcoin blockchain:
https://preview.redd.it/oxri5a7gp9g11.png?width=735&format=png&auto=webp&s=14e88db4fc4d1743406939343d42e33352b05782
Let us call such a transaction financing_tx. In fact, it is almost an ordinary Bitcoin htlc transaction that is used in atomic swap with the only difference that in the amount field, 546 satoshi is the minimum number of Bitcoins that can be at the output of the transaction, below this value, Bitcoin counts the transaction as dust and does not conduct it.
7) Alice creates a transaction according to the following scheme:
https://preview.redd.it/awz9uzuhp9g11.png?width=1000&format=png&auto=webp&s=9ca79e77ca6aff631a39ae95dfaa70aa06d695ec
Let us call this transaction redeem_tx. Alice creates such a transaction with two inputs: the first is the input referencing the output of funding_tx, which contains the htlc script. Alice does not sign this script, that is, the SigScript field remains completely empty. The second input is the input referring to any unspent exits of Alice, the main condition is that at this output stage there are enough Bitcoins to pay the transaction fee, and this entry is signed by Alice with her private key with the signature type SIGHASH_ALL (that is, she signs the entire transaction except for SigScript fields on the inputs transaction, which makes this transaction immutable. The outputs of the same transaction are the elementary Simple Send and a TetherUS from Alice to Bob (details of what Simple Send, payload is and how it works can be found in another section).
8) Alice sends Bob the redeem_tx created in the previous paragraph and the one she signed herself.
9) Bob got the redeem_tx sent by Alice, checks it, just looks through the inputs and outputs, making sure that this is really a transaction that Alice should have created using the real algorithm. After that, Bob signs the transaction with his private key and provides the secret value in the SigScript of the corresponding redeem_tx entry.
10) Bob sends the signed redeem_tx transaction to the blockchain, thereby transferring the TetherUS currency from Alice to himself. Note — before carrying out this step, we still need to check that Alice’s address has the necessary amount of TetherUS.
11) Alice looks through blockchain A and gets the value secret and uses it in the B blockchain to transfer the funds using the htlc transaction Bob created in point 3. The exchange ends here.
Stating the obvious: naturally the timelock value used by Bob when creating the htlc-transaction must be significantly longer than the timelock that Alice uses, since her htlc transaction should be spent earlier than the htlc created by Bob. This is necessary so that Bob cannot manage to spend both htlc.

Conclusion

Thus, connecting Omni Layer to Swap Online allows users to cover transactions.

Full research you may find in our Github

C++ source code for creating TX
C++ source code for redeem TX

Swap.Online Essential Links

Website: https://testnet.swap.online GitHub: https://github.com/swaponline Email: [email protected] Telegram: https://t.me/swaponline Facebook: https://www.facebook.com/Swaponline Twitter: https://twitter.com/SwapOnlineTeam Wiki: https://wiki.swap.online/ Bitcointalk: https://bitcointalk.org/index.php?topic=4636633
submitted by noxonsu to SwapOnline [link] [comments]

How to Deposit and Withdraw on Binance Exchange  Complete ... Binance $100 Day Beginners Guide. To Crypto trading on Binance Binance para iniciantes - veja como usar essa exchange de ... BTC TRADING FOR BEGINNERS  Cryptocurrency Exchange w ... BITCOIN’S CRASH PATTERN: How Long?! How To Move Your Altcoins From Binance To Bittrex This Line Is Critical For Bitcoin + Binance Scandal How To Move Your Bitcoin From Gemini To Binance

Binance (Бинанс) – это китайская криптовалютная биржа, по состоянию на март 2018 года является крупнейшей по объему операций за сутки. Основатель биржи – Чанпен Джао. После запрета властей КНР на криптовалютные операции ... Binance cryptocurrency exchange - We operate the worlds biggest bitcoin exchange and altcoin crypto exchange in the world by volume Binance’s certainty is that regardless of what will happen, Bitcoin is here to stay, all the more so at this time when the Covid 19 pandemic has revolutionized the world economy. Binance says there’s a need for a currency that resists censorship, without controls, without borders and that is set not to devalue itself. Russia’s telecom regulator Roskomnadzor has added Binance, the world’s largest crypto exchange, to the list of blacklisted websites in the country. The exchange was blacklisted on June 2, 2020, but Binance became aware of this only on September 24th, after receiving communication from Roskomnadzor. Bestchange.ru, Binance blacklisted, Bitcoin Transactions, Crypto regulation, Roskomnadzor, Russia, Russia’s Federal Service for Supervision of Communications Information Technology and Mass Media Home Bitcoin Crypto Exchange Binance Blacklisted by Russia’s Telecom Censorship Agency Crypto Exchange Binance Blacklisted by Russia’s Telecom Censorship Agency . September 26, 2020 Delia Bitcoin 0. Russia’s telecom regulator Roskomnadzor has added Binance, the world’s largest crypto exchange, to the list of blacklisted websites in the country. The exchange was blacklisted on June 2 ...

[index] [21376] [23412] [22822] [4298] [18395] [9461] [7376] [12960] [3515] [4660]

How to Deposit and Withdraw on Binance Exchange Complete ...

Subscribe to my channel for more videos showing how to create passive income with Cryptocurrency. Start buying Bitcoin now with a FREE account by clicking he... Binance $100 Day Beginners Guide. To Crypto trading on Binance REGISTRATION Binance: https://clck.ru/JsEpq All Projects. Push! https://bitcoin-eng.blogsp... This Line Is Critical For Bitcoin + Binance Scandal Altcoin Daily. Loading... Unsubscribe from Altcoin Daily? Cancel Unsubscribe. Working... Subscribe Subscribed Unsubscribe 161K. Loading ... This bitcoin market trading analysis applies to various exchanges, including Bitmex/Bybit and Binance. Tackling questions like if Bitcoin can reach 20k again and if we will be seeing a crypto ... This video was the old version of PDAX I ENCOURAGE YOU TO WATCH MY LATEST VIDEO ABOUT PDAX: https://www.youtube.com/playlist?list=PLzKnWOuYT-c9L4vVmrQk80oh1F... This video is unavailable. Watch Queue Queue. Watch Queue Queue Queue binance how to trade on binance bitcoin for dummies bitcoin 101 cryptocurrency how cryptocurrency works what is cryptocurrency mining cryptocurrency meaning cryptocurrency charts cryptocurrency ... Binance para iniciantes - veja como usar essa exchange de Bitcoin! Tutorial 2019/2020 - Link: https://cryptotchaps.com/link/binance • Binance: https://crypto... =====(binance tutorial for beginners)===== How to Deposit and Withdraw on Binance Exchange Complete Tutorial Bitcoin Cryptocurrency. #binance tutorial mo...

#